LetsBeBiz-Redesign/openclaw/docs/install/docker.md

---
summary: "Optional Docker-based setup and onboarding for OpenClaw"
read_when:
  - You want a containerized gateway instead of local installs
  - You are validating the Docker flow
title: "Docker"
---

# Docker (optional)

Docker is **optional**. Use it only if you want a containerized gateway or to validate the Docker flow.

## Is Docker right for me?

- **Yes**: you want an isolated, throwaway gateway environment or to run OpenClaw on a host without local installs.
- **No**: you’re running on your own machine and just want the fastest dev loop. Use the normal install flow instead.
- **Sandboxing note**: agent sandboxing uses Docker too, but it does **not** require the full gateway to run in Docker. See [Sandboxing](/gateway/sandboxing).

This guide covers:

- Containerized Gateway (full OpenClaw in Docker)
- Per-session Agent Sandbox (host gateway + Docker-isolated agent tools)

Sandboxing details: [Sandboxing](/gateway/sandboxing)

## Requirements

- Docker Desktop (or Docker Engine) + Docker Compose v2
- At least 2 GB RAM for image build (`pnpm install` may be OOM-killed on 1 GB hosts with exit 137)
- Enough disk for images + logs

## Containerized Gateway (Docker Compose)

### Quick start (recommended)

From repo root:

```bash
./docker-setup.sh
```

This script:

- builds the gateway image
- runs the onboarding wizard
- prints optional provider setup hints
- starts the gateway via Docker Compose
- generates a gateway token and writes it to `.env`

Optional env vars:

- `OPENCLAW_DOCKER_APT_PACKAGES` — install extra apt packages during build
- `OPENCLAW_EXTRA_MOUNTS` — add extra host bind mounts
- `OPENCLAW_HOME_VOLUME` — persist `/home/node` in a named volume

After it finishes:

- Open `http://127.0.0.1:18789/` in your browser.
- Paste the token into the Control UI (Settings → token).
- Need the URL again? Run `docker compose run --rm openclaw-cli dashboard --no-open`.

It writes config/workspace on the host:

- `~/.openclaw/`
- `~/.openclaw/workspace`

Running on a VPS? See [Hetzner (Docker VPS)](/install/hetzner).

### Shell Helpers (optional)

For easier day-to-day Docker management, install `ClawDock`:

```bash
mkdir -p ~/.clawdock && curl -sL https://raw.githubusercontent.com/openclaw/openclaw/main/scripts/shell-helpers/clawdock-helpers.sh -o ~/.clawdock/clawdock-helpers.sh
```

**Add to your shell config (zsh):**

```bash
echo 'source ~/.clawdock/clawdock-helpers.sh' >> ~/.zshrc && source ~/.zshrc
```

Then use `clawdock-start`, `clawdock-stop`, `clawdock-dashboard`, etc. Run `clawdock-help` for all commands.

See [`ClawDock` Helper README](https://github.com/openclaw/openclaw/blob/main/scripts/shell-helpers/README.md) for details.

### Manual flow (compose)

```bash
docker build -t openclaw:local -f Dockerfile .
docker compose run --rm openclaw-cli onboard
docker compose up -d openclaw-gateway
```

Note: run `docker compose ...` from the repo root. If you enabled
`OPENCLAW_EXTRA_MOUNTS` or `OPENCLAW_HOME_VOLUME`, the setup script writes
`docker-compose.extra.yml`; include it when running Compose elsewhere:

```bash
docker compose -f docker-compose.yml -f docker-compose.extra.yml <command>
```

### Control UI token + pairing (Docker)

If you see “unauthorized” or “disconnected (1008): pairing required”, fetch a
fresh dashboard link and approve the browser device:

```bash
docker compose run --rm openclaw-cli dashboard --no-open
docker compose run --rm openclaw-cli devices list
docker compose run --rm openclaw-cli devices approve <requestId>
```

More detail: [Dashboard](/web/dashboard), [Devices](/cli/devices).

### Extra mounts (optional)

If you want to mount additional host directories into the containers, set
`OPENCLAW_EXTRA_MOUNTS` before running `docker-setup.sh`. This accepts a
comma-separated list of Docker bind mounts and applies them to both
`openclaw-gateway` and `openclaw-cli` by generating `docker-compose.extra.yml`.

Example:

```bash
export OPENCLAW_EXTRA_MOUNTS="$HOME/.codex:/home/node/.codex:ro,$HOME/github:/home/node/github:rw"
./docker-setup.sh
```

Notes:

- Paths must be shared with Docker Desktop on macOS/Windows.
- Each entry must be `source:target[:options]` with no spaces, tabs, or newlines.
- If you edit `OPENCLAW_EXTRA_MOUNTS`, rerun `docker-setup.sh` to regenerate the
  extra compose file.
- `docker-compose.extra.yml` is generated. Don’t hand-edit it.

### Persist the entire container home (optional)

If you want `/home/node` to persist across container recreation, set a named
volume via `OPENCLAW_HOME_VOLUME`. This creates a Docker volume and mounts it at
`/home/node`, while keeping the standard config/workspace bind mounts. Use a
named volume here (not a bind path); for bind mounts, use
`OPENCLAW_EXTRA_MOUNTS`.

Example:

```bash
export OPENCLAW_HOME_VOLUME="openclaw_home"
./docker-setup.sh
```

You can combine this with extra mounts:

```bash
export OPENCLAW_HOME_VOLUME="openclaw_home"
export OPENCLAW_EXTRA_MOUNTS="$HOME/.codex:/home/node/.codex:ro,$HOME/github:/home/node/github:rw"
./docker-setup.sh
```

Notes:

- Named volumes must match `^[A-Za-z0-9][A-Za-z0-9_.-]*$`.
- If you change `OPENCLAW_HOME_VOLUME`, rerun `docker-setup.sh` to regenerate the
  extra compose file.
- The named volume persists until removed with `docker volume rm <name>`.

### Install extra apt packages (optional)

If you need system packages inside the image (for example, build tools or media
libraries), set `OPENCLAW_DOCKER_APT_PACKAGES` before running `docker-setup.sh`.
This installs the packages during the image build, so they persist even if the
container is deleted.

Example:

```bash
export OPENCLAW_DOCKER_APT_PACKAGES="ffmpeg build-essential"
./docker-setup.sh
```

Notes:

- This accepts a space-separated list of apt package names.
- If you change `OPENCLAW_DOCKER_APT_PACKAGES`, rerun `docker-setup.sh` to rebuild
  the image.

### Power-user / full-featured container (opt-in)

The default Docker image is **security-first** and runs as the non-root `node`
user. This keeps the attack surface small, but it means:

- no system package installs at runtime
- no Homebrew by default
- no bundled Chromium/Playwright browsers

If you want a more full-featured container, use these opt-in knobs:

1. **Persist `/home/node`** so browser downloads and tool caches survive:

```bash
export OPENCLAW_HOME_VOLUME="openclaw_home"
./docker-setup.sh
```

2. **Bake system deps into the image** (repeatable + persistent):

```bash
export OPENCLAW_DOCKER_APT_PACKAGES="git curl jq"
./docker-setup.sh
```

3. **Install Playwright browsers without `npx`** (avoids npm override conflicts):

```bash
docker compose run --rm openclaw-cli \
  node /app/node_modules/playwright-core/cli.js install chromium
```

If you need Playwright to install system deps, rebuild the image with
`OPENCLAW_DOCKER_APT_PACKAGES` instead of using `--with-deps` at runtime.

4. **Persist Playwright browser downloads**:

- Set `PLAYWRIGHT_BROWSERS_PATH=/home/node/.cache/ms-playwright` in
  `docker-compose.yml`.
- Ensure `/home/node` persists via `OPENCLAW_HOME_VOLUME`, or mount
  `/home/node/.cache/ms-playwright` via `OPENCLAW_EXTRA_MOUNTS`.

### Permissions + EACCES

The image runs as `node` (uid 1000). If you see permission errors on
`/home/node/.openclaw`, make sure your host bind mounts are owned by uid 1000.

Example (Linux host):

```bash
sudo chown -R 1000:1000 /path/to/openclaw-config /path/to/openclaw-workspace
```

If you choose to run as root for convenience, you accept the security tradeoff.

### Faster rebuilds (recommended)

To speed up rebuilds, order your Dockerfile so dependency layers are cached.
This avoids re-running `pnpm install` unless lockfiles change:

```dockerfile
FROM node:22-bookworm

# Install Bun (required for build scripts)
RUN curl -fsSL https://bun.sh/install | bash
ENV PATH="/root/.bun/bin:${PATH}"

RUN corepack enable

WORKDIR /app

# Cache dependencies unless package metadata changes
COPY package.json pnpm-lock.yaml pnpm-workspace.yaml .npmrc ./
COPY ui/package.json ./ui/package.json
COPY scripts ./scripts

RUN pnpm install --frozen-lockfile

COPY . .
RUN pnpm build
RUN pnpm ui:install
RUN pnpm ui:build

ENV NODE_ENV=production

CMD ["node","dist/index.js"]
```

### Channel setup (optional)

Use the CLI container to configure channels, then restart the gateway if needed.

WhatsApp (QR):

```bash
docker compose run --rm openclaw-cli channels login
```

Telegram (bot token):

```bash
docker compose run --rm openclaw-cli channels add --channel telegram --token "<token>"
```

Discord (bot token):

```bash
docker compose run --rm openclaw-cli channels add --channel discord --token "<token>"
```

Docs: [WhatsApp](/channels/whatsapp), [Telegram](/channels/telegram), [Discord](/channels/discord)

### OpenAI Codex OAuth (headless Docker)

If you pick OpenAI Codex OAuth in the wizard, it opens a browser URL and tries
to capture a callback on `http://127.0.0.1:1455/auth/callback`. In Docker or
headless setups that callback can show a browser error. Copy the full redirect
URL you land on and paste it back into the wizard to finish auth.

### Health check

```bash
docker compose exec openclaw-gateway node dist/index.js health --token "$OPENCLAW_GATEWAY_TOKEN"
```

### E2E smoke test (Docker)

```bash
scripts/e2e/onboard-docker.sh
```

### QR import smoke test (Docker)

```bash
pnpm test:docker:qr
```

### Notes

- Gateway bind defaults to `lan` for container use.
- Dockerfile CMD uses `--allow-unconfigured`; mounted config with `gateway.mode` not `local` will still start. Override CMD to enforce the guard.
- The gateway container is the source of truth for sessions (`~/.openclaw/agents/<agentId>/sessions/`).

## Agent Sandbox (host gateway + Docker tools)

Deep dive: [Sandboxing](/gateway/sandboxing)

### What it does

When `agents.defaults.sandbox` is enabled, **non-main sessions** run tools inside a Docker
container. The gateway stays on your host, but the tool execution is isolated:

- scope: `"agent"` by default (one container + workspace per agent)
- scope: `"session"` for per-session isolation
- per-scope workspace folder mounted at `/workspace`
- optional agent workspace access (`agents.defaults.sandbox.workspaceAccess`)
- allow/deny tool policy (deny wins)
- inbound media is copied into the active sandbox workspace (`media/inbound/*`) so tools can read it (with `workspaceAccess: "rw"`, this lands in the agent workspace)

Warning: `scope: "shared"` disables cross-session isolation. All sessions share
one container and one workspace.

### Per-agent sandbox profiles (multi-agent)

If you use multi-agent routing, each agent can override sandbox + tool settings:
`agents.list[].sandbox` and `agents.list[].tools` (plus `agents.list[].tools.sandbox.tools`). This lets you run
mixed access levels in one gateway:

- Full access (personal agent)
- Read-only tools + read-only workspace (family/work agent)
- No filesystem/shell tools (public agent)

See [Multi-Agent Sandbox & Tools](/tools/multi-agent-sandbox-tools) for examples,
precedence, and troubleshooting.

### Default behavior

- Image: `openclaw-sandbox:bookworm-slim`
- One container per agent
- Agent workspace access: `workspaceAccess: "none"` (default) uses `~/.openclaw/sandboxes`
  - `"ro"` keeps the sandbox workspace at `/workspace` and mounts the agent workspace read-only at `/agent` (disables `write`/`edit`/`apply_patch`)
  - `"rw"` mounts the agent workspace read/write at `/workspace`
- Auto-prune: idle > 24h OR age > 7d
- Network: `none` by default (explicitly opt-in if you need egress)
  - `host` is blocked.
  - `container:<id>` is blocked by default (namespace-join risk).
- Default allow: `exec`, `process`, `read`, `write`, `edit`, `sessions_list`, `sessions_history`, `sessions_send`, `sessions_spawn`, `session_status`
- Default deny: `browser`, `canvas`, `nodes`, `cron`, `discord`, `gateway`

### Enable sandboxing

If you plan to install packages in `setupCommand`, note:

- Default `docker.network` is `"none"` (no egress).
- `docker.network: "host"` is blocked.
- `docker.network: "container:<id>"` is blocked by default.
- Break-glass override: `agents.defaults.sandbox.docker.dangerouslyAllowContainerNamespaceJoin: true`.
- `readOnlyRoot: true` blocks package installs.
- `user` must be root for `apt-get` (omit `user` or set `user: "0:0"`).
  OpenClaw auto-recreates containers when `setupCommand` (or docker config) changes
  unless the container was **recently used** (within ~5 minutes). Hot containers
  log a warning with the exact `openclaw sandbox recreate ...` command.

```json5
{
  agents: {
    defaults: {
      sandbox: {
        mode: "non-main", // off | non-main | all
        scope: "agent", // session | agent | shared (agent is default)
        workspaceAccess: "none", // none | ro | rw
        workspaceRoot: "~/.openclaw/sandboxes",
        docker: {
          image: "openclaw-sandbox:bookworm-slim",
          workdir: "/workspace",
          readOnlyRoot: true,
          tmpfs: ["/tmp", "/var/tmp", "/run"],
          network: "none",
          user: "1000:1000",
          capDrop: ["ALL"],
          env: { LANG: "C.UTF-8" },
          setupCommand: "apt-get update && apt-get install -y git curl jq",
          pidsLimit: 256,
          memory: "1g",
          memorySwap: "2g",
          cpus: 1,
          ulimits: {
            nofile: { soft: 1024, hard: 2048 },
            nproc: 256,
          },
          seccompProfile: "/path/to/seccomp.json",
          apparmorProfile: "openclaw-sandbox",
          dns: ["1.1.1.1", "8.8.8.8"],
          extraHosts: ["internal.service:10.0.0.5"],
        },
        prune: {
          idleHours: 24, // 0 disables idle pruning
          maxAgeDays: 7, // 0 disables max-age pruning
        },
      },
    },
  },
  tools: {
    sandbox: {
      tools: {
        allow: [
          "exec",
          "process",
          "read",
          "write",
          "edit",
          "sessions_list",
          "sessions_history",
          "sessions_send",
          "sessions_spawn",
          "session_status",
        ],
        deny: ["browser", "canvas", "nodes", "cron", "discord", "gateway"],
      },
    },
  },
}
```

Hardening knobs live under `agents.defaults.sandbox.docker`:
`network`, `user`, `pidsLimit`, `memory`, `memorySwap`, `cpus`, `ulimits`,
`seccompProfile`, `apparmorProfile`, `dns`, `extraHosts`,
`dangerouslyAllowContainerNamespaceJoin` (break-glass only).

Multi-agent: override `agents.defaults.sandbox.{docker,browser,prune}.*` per agent via `agents.list[].sandbox.{docker,browser,prune}.*`
(ignored when `agents.defaults.sandbox.scope` / `agents.list[].sandbox.scope` is `"shared"`).

### Build the default sandbox image

```bash
scripts/sandbox-setup.sh
```

This builds `openclaw-sandbox:bookworm-slim` using `Dockerfile.sandbox`.

### Sandbox common image (optional)

If you want a sandbox image with common build tooling (Node, Go, Rust, etc.), build the common image:

```bash
scripts/sandbox-common-setup.sh
```

This builds `openclaw-sandbox-common:bookworm-slim`. To use it:

```json5
{
  agents: {
    defaults: {
      sandbox: { docker: { image: "openclaw-sandbox-common:bookworm-slim" } },
    },
  },
}
```

### Sandbox browser image

To run the browser tool inside the sandbox, build the browser image:

```bash
scripts/sandbox-browser-setup.sh
```

This builds `openclaw-sandbox-browser:bookworm-slim` using
`Dockerfile.sandbox-browser`. The container runs Chromium with CDP enabled and
an optional noVNC observer (headful via Xvfb).

Notes:

- Headful (Xvfb) reduces bot blocking vs headless.
- Headless can still be used by setting `agents.defaults.sandbox.browser.headless=true`.
- No full desktop environment (GNOME) is needed; Xvfb provides the display.
- Browser containers default to a dedicated Docker network (`openclaw-sandbox-browser`) instead of global `bridge`.
- Optional `agents.defaults.sandbox.browser.cdpSourceRange` restricts container-edge CDP ingress by CIDR (for example `172.21.0.1/32`).
- noVNC observer access is password-protected by default; OpenClaw provides a short-lived observer token URL instead of sharing the raw password in the URL.

Use config:

```json5
{
  agents: {
    defaults: {
      sandbox: {
        browser: { enabled: true },
      },
    },
  },
}
```

Custom browser image:

```json5
{
  agents: {
    defaults: {
      sandbox: { browser: { image: "my-openclaw-browser" } },
    },
  },
}
```

When enabled, the agent receives:

- a sandbox browser control URL (for the `browser` tool)
- a noVNC URL (if enabled and headless=false)

Remember: if you use an allowlist for tools, add `browser` (and remove it from
deny) or the tool remains blocked.
Prune rules (`agents.defaults.sandbox.prune`) apply to browser containers too.

### Custom sandbox image

Build your own image and point config to it:

```bash
docker build -t my-openclaw-sbx -f Dockerfile.sandbox .
```

```json5
{
  agents: {
    defaults: {
      sandbox: { docker: { image: "my-openclaw-sbx" } },
    },
  },
}
```

### Tool policy (allow/deny)

- `deny` wins over `allow`.
- If `allow` is empty: all tools (except deny) are available.
- If `allow` is non-empty: only tools in `allow` are available (minus deny).

### Pruning strategy

Two knobs:

- `prune.idleHours`: remove containers not used in X hours (0 = disable)
- `prune.maxAgeDays`: remove containers older than X days (0 = disable)

Example:

- Keep busy sessions but cap lifetime:
  `idleHours: 24`, `maxAgeDays: 7`
- Never prune:
  `idleHours: 0`, `maxAgeDays: 0`

### Security notes

- Hard wall only applies to **tools** (exec/read/write/edit/apply_patch).
- Host-only tools like browser/camera/canvas are blocked by default.
- Allowing `browser` in sandbox **breaks isolation** (browser runs on host).

## Troubleshooting

- Image missing: build with [`scripts/sandbox-setup.sh`](https://github.com/openclaw/openclaw/blob/main/scripts/sandbox-setup.sh) or set `agents.defaults.sandbox.docker.image`.
- Container not running: it will auto-create per session on demand.
- Permission errors in sandbox: set `docker.user` to a UID:GID that matches your
  mounted workspace ownership (or chown the workspace folder).
- Custom tools not found: OpenClaw runs commands with `sh -lc` (login shell), which
  sources `/etc/profile` and may reset PATH. Set `docker.env.PATH` to prepend your
  custom tool paths (e.g., `/custom/bin:/usr/local/share/npm-global/bin`), or add
  a script under `/etc/profile.d/` in your Dockerfile.